|
AEROSPACE |
|
| and DEFENSE |
|
• Cut Gaskets and Seals
• Silicone Sheets
• Latex Sponge
• Silicone Foams
• Poron® Cellular Urethane
• Tygon® Tubing
• Custom Molded Parts
• O-Rings
• Teflon® Products
• Extrusions
• Spring Fast® Grommets
• Neoprene Tubing
• Fuel and Lubricant Tubing
• Viton® Tubing
|
• EMI Gaskets
• Gortex® Gaskets
• Conductive Paint
• Belts and Fabrics
• Matting
• Synflex® Hose
• Fittings
• Clamps
• Flexaust® Products
• Cord
• Electrical Tapes: 3M™ St. Gobain
• Ducting
• Gloves
• RFI Shielding
• Mil and ASTM Spec materials
|
 |
| |
 |
Lockheed
Huge O-Rings used as a fuel seal in a transmission in the Bradley fighting vehicle troop carrier. |
General Electric
Plain fluorosilicone extrusion used as a protective edging on an enclosure to cover sharp metal. Must be resistant to jet fuel and withstand low temperatures of -100 F. |
|
|
Grommet on an enclosure used to protect wires running through from being chafed.
|
General Dynamics
EMI gasket made for an electronic cabinet door enclosure using Poron® Cellular Urethanes and Cho-fab™.
|
 |
 |
Hydraulic hose assembly used in mobile radar sites which cools down the electronic components in the mobile radar that is hooked onto jeeps.
|
Dust boot used in a machine as a wire conduit to protect wires from dust and dirt and allow the machine to stay clean for operation.
|
|
 |
Blodgett
Silicone Seal used as a heat seal in an oven on a Navy ship. |
Molded part used in the gun carriage for the military, made from Mil-spec compounds and molded with a metal insert. |
 |
 |
EMI enclosure for a printed circuit board. PVC aluminum laminate gives the part EMI shielding on one side and electrical insulation on the other.
|
Vibration damping 3M™ 435 damping foil is bonded inside an aircraft fuselage between the rib and stringers to help reduce unwanted noise inside the cabin. |
 |
